Integrate Furniture Testing Machines,Chair Castor Durability Furniture Testing Equipment
PRODUCT DESCRIPTION:
The machine is designed for evaluating the ability of chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth.
GENERL SPECIFICATIONS
Packaging Dimensions: (W*D*H) 2600*1130*1550mm
Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed)
Gross Weight: 659kg
HS Code: 9024800000
DESIGN STANDARD: Bifma x 5.1-2017
STANDARD FEATURES
| Load weight | 122KG(one set) |
| Test speed | 10±2 times /min |
| Test stroke | 762mm (+ 50mm) |
| Display | Touch screen |
| Control mode | PLC mode |
| Testing cycles | 1-999,999(can be adjusted) |
| Power | AC /220V,3A,50HZ,0.2KW |
| Air pressure | ≥6kg/cm² |
CONFIGURATION:
| Items | Touch Screen | 1 piece |
| PLC | 1 piece |
| cylinder | 1 piece, Diameter: 80mm; route:800mm |
| Weight box | 1 piece(13kg) |
| Obstacles | 1 set(5 pieces) |
| Fixing clamps | 1 pieces |
TEST PROCEDURES
1.The chair or chair base shall be cycled 2,000 cycles over the obstacles as shown in Figure 16b and then
98,000 cycles on a smooth, hard surface (steel preferred) without obstacles.
2.At the conclusion of cycling, a 22 N (5 lbf.) pull force shall be applied to each caster in line with the caster stem centerline.
PACKAGING AND SHIPPING:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
AFTER-SERVICE:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Product Tags:
|
|
Integrate Furniture Testing Machines , Chair Castor Durability Furniture Testing Equipment Images
|
