Programmable Water Proof Environmental Test Chambers With PLC Control system
1. Product introduction:
Water-resistance test chamber used to test anti-rain and water-proof performance for products, the products such as steam locomotive lamps, wiper performance, waterproof bands, motorcycle instruments, defense industry, navigation systems, missiles, radar cone top, aerospace industry etc.
Water-resistance test chamber is suitable for testing whether the electrical products, enclosures and seals can guarantee the good performance of the equipment and components under the rainy environment.This product adopts scientific design, so that the equipment can simulate the realistic dripping, drenching, splashing, spraying and other environments.The adoption of comprehensive control system and frequency conversion technology makes it possible to automatically adjust the rotation Angle of rainfall sample frame, the swing Angle of water spray pendulum and the swing frequency of water spray.
2.Standard: IPX4. IPX3
Compliance standards: GB2423,38-90, gb4706.32-2004 iec-529
Application:
3. Applicable industries:
Applied to plastics, rubber, paint, coatings, printing ink, paper, pharmaceuticals, food, cosmetics, textiles, auto parts, packaging materials, building materials, electricity and the electrical products; it provide an important testing data for scientific research, product development and quality control
4. Parameters(Model:HD-E712-400):
| Control mode | PLC+ stepping motor + touch screen control system Swing tube Angle, swing speed, test time can be set directly on the touch screen), do not like the old gear adjustment, photoelectric switch, etc., the new efficient and accurate |
| Floor area reference size (mm) | width 2800× height 2800× length 4000 (the most ideal method is to use glass to separate a small room);(provided by the customer) |
| Bench | Φ 500 mm in diameter, of about 1 RPM, high must be adjustable |
| Radius of water spraying ring (mm) | 0.4 meters, which can be removed and replaced (test method a for three-level and four-level waterproofing) |
| Angle range of the spray pipe swing | with the vertical direction can swing ±60° or ±160° range (can be set) |
| Diameter of water jet hole (mm) | 0.4 |
| Arranging the | 1, this equipment is match R400mm arranging the nozzle is Φ 0.4 mm hole, nozzle number according to the standard for 25. |
| Flow rate of each water hole | 0.07l /M(adjustable), flow meter shows direct reading; |
| Water spraying pressure (Kpa) | 80-150, with direct reading of the pressure gauge; |
| Time of pendulum | each swing (2×120°) is about 4S, or each swing (2×320°) is about 12S |
| Test time | 1-999,999min (adjustable) |
| Water pressure | 80~150Kpa (adjustable) |
| Material | stainless steel or powder spraying (all parts in contact with water are made of stainless steel) |
| Control system | PLC+ stepping motor + touch screen |
| Power supply | single phase, 220V, 50Hz. |
| Safety protection device | 1. Overload of power supply and short circuit protection 2. Ground protection 3. Water shortage protection 4. Alarm alarm prompt |
Product Tags:
|
|
Programmable Water Proof Environmental Test Chambers With PLC Control System Images
|
